The operation of the paper cutter is relatively simple, and the requirements for the environment are not high. Generally, power supply is used in general office to ensure power supply. Generally, the paper cutter is equipped with an automatic switch system. As long as the old paper is being fed, the paper cutter will automatically rotate to cut the paper. Some paper cutters need to press the start button once, and the paper cutter will turn to continue cutting. After shredding, press the stop / reverse key to stop the cutter.
Before breaking paper, check whether there are paper clips, staples and other hard objects on the documents to be broken. If there is, it should be removed and then put into the paper mouth, otherwise the tool may be damaged. When using the paper cutter, pay attention not to jam too much paper at a time, especially the paper with better quality. Pay more attention when using, so as to avoid paper jam. When placing the paper, try not to put it askew. For the narrow paper, try to put it in the center of the paper inlet.
For early products, in case of paper jam during use, press the reverse key or stop key to enable the chip to continue to be used. Most of the paper cutting machines are equipped with overload power-off protection device, when the motor is overloaded and heated, it will stop automatically. At this time, stop using for 20-30min to cool the motor. At the same time, it should be considered to reduce the number of input paper properly when reusing. The more advanced paper cutter will automatically stop and return paper once it is overloaded, which is more convenient to use. When the box of the paper cutter is full, some machines will automatically make a sound to remind people to remove the paper scraps in time.